Removing the Windshield

Click on the photos for a full size image.

  1. Raise the windshield all the way up to gain access to the trim strip screws.

  2. Put a piece of paper under the lower edge of each trim strip to keep from scratching the windshield when removing the trim strip. I like to use a sticky note so it won’t fall off.

  3. Remove the T25 Torx screw holding each trim strip on.

  4. Lift the top of each trim strip and push down to release.

  5. This image shows the "hook" that holds the bottom of the trim piece in.

  6. Remove the T25 Torx screws on each side that hold the windshield to the mounting bracket.