Firmware

_images/firmware-tab.png

Flashing Firmware

In Firmware Tab you can view and change the 7i92 firmware. Before using the Firmware buttons you must select the IP Address in the Board Setup Group. The 7i92 must be connected to the PC, 5vdc power supplied and jumpered for the address selected.

  • Read Reads the current firmware and displays it in the output window. If sucessful then you have the 7i92 configured and connected correctly.
  • Flash After selecting the firmware the Flash button will write the new firmware to the 7i92.
  • Reload After flashing you must either Reload or power cycle the 7i92.
  • Copy Copies the contents of the output window to the clipboard. Then you can paste the output to a file for later use.